j9九游会

产品名称：蒸汽回火真空炉

Name: Steam tempering vacuum furnace

用途：高速钢刀具，模具，杠工具，硅钢片，电机定子，转子，金属刀片的蒸汽热处理，处理后耐磨性，防锈，防腐，绝缘性良好

Application: steam heat treatment of high speed steel tool, die, bar tool, silicon steel sheet, motor stator, rotor and metal blade, wear resistance, antirust, anticorrosion and insulation after treatment

 特点 /characteristic：

1.全自动程序控制，运行平稳，工艺重视性好，人机界面可选

. Automatic program control, stable operation, good process re-view, optional man-machine interface

   2 ..辐射管加热，加热室可制成圆形或方形，热风机强力循环，无死角，温度均匀

.  The radiation tube or nickel strip is heated, the heating chamber can be made into circle or square, the hot fan has strong circulation, no dead angle, and the temperature is uniform. 

3．蒸汽发生器为不锈钢材质，采用不锈钢高温阀及流量控制

The steam generator is made of stainless steel, which adopts stainless steel high temperature valve and flow control.

4.设真空隔膜阀及压力触感器，条件达到自动置换新鲜介质

The vacuum diaphragm valve and the pressure contact sensor are set up, and the conditions are up to the automatic replacement of the fresh medium.。

 配置选择/Configure select:

产品 规格/  Specifications：

注：特殊规格要求可根据客户要求定制

Note: Special specification requirements can be customized according to customer requirements

以下参数可根据工艺要求调整，不作为验收依据，具体以技术方案和协议为准

The following parameters may be adjusted according to the process requirements and shall not be used as the basis for acceptance, depending on the technical scheme and agreement